RGP Contact Lenses

Your Complete Guide to RGP Contact Lenses

 

What is a GP or RGP lens?

Rigid Gas Permeable (RGP) or just Gas Permeable (GP) lenses are not the same as the old style HARD contact lenses, which are now no longer used. Hard contact lenses were made of a material known as PMMA or Perspex. Most RGP lenses contain silicone that is oxygen permeable, so oxygen can pass through the lens giving greater comfort and better eye health. Often RGPs transmit more oxygen to the eye than do traditional soft contact lenses. RGPs can also provide clearer vision, durability, and deposit resistance than soft contact lenses and they can be easier to clean. Since they’re long lasting, they can be less expensive than soft lenses over time.

Are they comfortable to wear?

Yes, but it may take between 10 days and 1 month before they settle in. They are certainly less comfortable initially than soft contact lenses but after they have settled they are equally comfortable, and GP lenses can be more comfortable in the long term. Over time your corneal sensitivity decreases and you should not be aware of your new RGP contact lenses in your eyes until after 10-12 hours of wear. Due to our windy/dry climate, air-conditioning and computer work, the lenses can dry out and become uncomfortable sooner.

How do RGP contact lenses correct distorted vision?

If you have had previous eye surgery/trauma or have a condition called Keratoconus then your cornea may be irregular in shape. A RGP lens vaults right over the top of your cornea to provide a new clear, regular surface for the light to refract on. Between the back surface of the RGP lens and your eye your tears fill in any irregularities, resulting in clearer vision with reduced glare and haloes.

How long will RGP lenses last?

If the lenses are well cared for and kept clean they can last for up to 2 years, in some cases even longer. We recommend regular 6 monthly checks and as long as the lenses are fitting safely, providing clear vision and are comfortable, there is no need to change them.

Daily wear time:

On your first day, start at between 3-4 hours of wear and for every day after that try for up to 1 hour longer. If you can only get 10 minutes longer per day that is OK. Often the slower you get used to the lenses, the better your long term comfort will be. Your eyes do undergo some physiological changes when you start wearing RGP lenses, so you need to slowly get used to them. At the first sign of discomfort take the lenses out and try for a bit longer the next day.

How do I insert my RGP contact lenses?

1. Thoroughly wash and dry your hands. Remove the lens from its case by putting your finger onto the lens surface where it should stick and then be able to lift the lens out. If you wipe the lens up the side of the case it can scratch/chip the lens edge.

2. Balance the lens on the tip of your forefinger.

3. Add a fresh drop of conditioning solution on the lens to cushion it onto your eye.

4. Pull your lower lid down with the middle finger of the same hand.

5. Hold your upper lid firmly near the lashes with your other hand.

6. Whilst looking straight at your eye in the mirror, gently apply the lens to the centre of your cornea (the coloured part of the eye).

7. Release your lower lid first, then SLOWLY let go your upper lid and blink.

8. If the lens does not feel comfortable, remove it, clean it and re-insert

Note: If the lens is not central on the coloured part of your eye, gently manoeuvre the lens using your eyelids. Don’t press directly on the lens with your finger but use the edge of your eyelid to move the lens.

How do I remove my RGP contact lenses?

Blink Method
This method uses your eyelids to effectively “blink” the lens out of your eye. The lens can come out quite quickly so ensure you are ready with your hand to catch the lens.

1. Look straight ahead with your eyes open as wide as possible (staring).

2. Place your forefinger vertically at the outer corner of your eyelids and press then pull your finger towards your ear and slightly upwards.

3. Open your eyes wide and blink firmly. As you blink the lens will come out so you need to be ready to catch the lens with your other hand cupped under your eye.

4. If the lens does not come out the first time, relax, have a few blinks and repeat.

Lens suction holder
This is easy but you must remember to bring it with you everywhere!

1. Wet the surface of the suction holder with some conditioning solution.

2. When the holder has suctioned onto the lens gently take the lens off your eye.

3. To remove the lens from the holder slide it to the side rather than pulling it off directly, which can result in the lens bending out of shape.

4. If you are using an air-suction holder press it to remove the air before putting the sucker into contact with the GP lens and releasing the suction. The lens should now be stuck to the sucker and it can be removed. Again slide the lens off sideways.

5. The suction holder should be cleaned regularly with your contact lens cleaner rinsed with conditioning solution and left to air dry.

Using your lids
This method uses your eyelids to gently lift the lens off the eye
Look down, and use your index finger to lift your upper eyelid.

1. Look straight ahead, and use your other index finger to pull down your lower eyelid.

2. Now, you should be looking straight ahead and both lid margins should be touching the white of the eye just outside of the edge of the lens. Making sure to keep the upper lid firmly against the white of the eye and the upper edge of the lens, then gently push the lower lid in and up under the lower edge of the lens, creating space/air below the lens.

3. Continue to slide the lower lid up, bringing the two lids together and the lens further off the eye, then finally let go of the lids and remove the lens from between the two lids.


How to take care of your lenses – General tips for successful contact lens wear

 

Always wash your hands before handling your contact lenses or eyes

Wash with soap and running water, remembering to rinse your hands thoroughly. Dry your hands with a towel. Ensure your nails are clean and not too long. Use non-cosmetic soap as soaps with lotions or oils in them can transfer to the contact lens and cause irritation on lens application along with blurred vision.

Cleaning of your contact lenses

It is important to clean your RGP contact lenses daily to maintain the highest standards of comfort and visual clarity. Each day after you remove your lenses, you must clean them prior to overnight storage.

ALWAYS use the prescribed cleaning solution, which serves as a cleanser and disinfectant. It also increases the comfort of your contact lenses. NEVER use saliva, saline or water of any type. Tap, distilled and bottled water (and particularly saliva) contain bacteria and viruses which may be absorbed by the contact lens and cause eye infections.

Sterile saline is NOT a disinfectant nor are contact lens rewetting drops.

Bio True Solution Opti-free puremoist for your RGP Lenses

Bio True Solution 

1. For rinsing your lenses, use only BioTrue or Opti-free puremoist.

Opti-free puremoist for your RGP Lenses

Opti-free Puremoist Solution 

2. Place the lens bowl-side up in the palm of your hand and apply a few drops of biotrue. With the pad of your finger gently rub the entire lens in a circular motion against the palm of your hand. Be sure to thoroughly clean the entire lens and then rinse it well in a steady stream of biotrue.

3. For disinfection use AOSept Hydrogen Peroxide Disinfection System. Carefully follow the instructions for the specific disinfection system you use. Always soak lenses in the provided lens case for at least six hours prior to inserting into the eye, so we recommend you do it overnight.

4. Use only the case provided with the AOSept disinfection system. Be sure to soak the lenses a minimum of 6 hours before inserting again. Never put AOSept directly into the eye. Never rinse lenses with AOSept prior to insertion into the eye. Solution

 AOSept for your RGP Lenses

AOSept

must be neutralised. Never use AOSept® Plus in a flat lens case.

5. Always use fresh solution when storing your lenses. Never “top off” or use old solution. Old solution should NEVER be re-used.

6. Do NOT allow the tip of the solution bottle to come into contact with any surface and keep the solution bottle tightly closed when not in use.

7. Always discard the old lens case to avoid contamination and ensure proper neutralisation.

 

Progent Intensive Cleaner for your RGP Contact Lenses

Progent Intensive Cleaner

8. Never  dry out your lenses with a tissue or a towel as it will scratch the front and back surfaces of the lenses, making them uncomfortable and decreasing your quality of vision.

9. To get rid of protein deposits (if advised by your optometrist), once a fortnight, use Progent Intensive Cleaner. Carefully follow the instructions for the specific disinfection system you use. NOTE: Never put Progent directly into the eye.

 

Expiry date of solution

Always check the expiry date of the solution. When you open a new bottle, write the date you need to discard it (generally 3 months after opening) on the container in a felt tip pen. Do not use out-of-date solution.

Contact lens cases

Aosept storage case for your RGP Contact Lenses

Aosept storage case

Bacteria can accumulate in contact lens cases. After putting in your contact lenses, the case should always be emptied, rinsed out with cleaning solution (Biotrue or Optifree Puremoist) – NEVER water – then wiped with a clean tissue and air-dried. A new contact lens case is included with every purchase of contact lens cleaning solution. Always throw away the old case and use the new one. Contact lens cases should be replaced if damaged or cracked.. The case should only be filled up to the top of the line with solution (if over-filled, the lens may ride up and be damaged by the lid).

Optifree puremoist/Biotrue storage for your RGP Contact Lenses

Optifree puremoist/ Biotrue storage case

Never wear a contact lens for longer than it is designed for

The use of the contact lenses past these dates is NOT recommended as the lenses are not structurally or functionally designed to last any longer. The material often breaks down after this date, causing irritation and poor vision.

Do not sleep in your contact lenses

In most cases you should remove RGP lenses before sleeping. Stagnation of the tear layer behind the lens could lead to a higher risk of eye infection. Since most of the people who need RGP lenses have already had some trouble with their eyes, further challenge to the surface of the eye would not be advisable.

Swimming and Water sports

The safest option is to wear goggles and thorough disinfect the lens afterwards. Water contains germs, which may then contaminate the contact lens. Wearing your contact lenses after these activities would be the same as wearing your wet swimsuit.  In the event you get water splashed in your eyes, make sure to remove your lenses and clean them thoroughly.

It is not recommended to swim in fresh water even if it’s flowing freely due to the risk of infection from Acanthamoeba, which can cause severe loss of vision.

Contact lens use when in hospital or unwell

Avoid wearing contact lenses in hospital or while unwell. Hospitals are often sources of infection. When you are sick (even just with a cold or flu) you risk spreading infection to your eye via contact lenses. You may also find it more difficult to manage your contact lenses safely while you are recuperating.

Avoid wearing contact lenses on a plane

The humidity in aircraft cabins is very low. If you wear your contact lenses they will become very dry and uncomfortable, and you will arrive at your destination with sore eyes.  Please wear your spectacles for flying.

When travelling

Use a smaller size bottle of solution, do NOT transfer solutions into small containers.


FAQ’s

 

What are the normal adaptation symptoms I can expect?

While you are first getting used to your lenses you may notice some or all of the following:

  • Variable vision due to increased tear production
  • Stinging, itching and abnormal blinking
  • Lens edge awareness particularly felt with your eyelids
  • Increased glare sensitivity – wear sunglasses
  • Initial discomfort with lots of close work/computer work – use more lubricant eye drops
  • Dryness in air-conditioning and smoky areas – use more lubricants and try cleaning your lenses mid way through the day
  • You may also notice a slight blur to your vision when you wear spectacles straight after removing your contact lenses. This should clear within 30 minutes.  

What is abnormal?

Persistent redness, discomfort, pain, blurred vision or if bright lights hurt your eyes. If these occur stop all lens wear and make an appointment to see us. “If in doubt take your lenses out.”

One of my contact lenses is suddenly uncomfortable, what should I do?

The first thing to do is to take the lens out. Does that fix the problem? If so, it is probably due to the lens rather than your eye itself. Now clean the lens thoroughly and put it back in. If that fixes the problem then there might have been something on the lens. If not then remove the lens again.

Now you need to carefully examine the edge of the lens in bright light. You might notice a small nick out of the edge of the lens. The lens would need to be replaced so please contact us.

In the above scenario if you remove the lens but your eye is still hurting it is likely that there is something wrong with your eye. That means it would be best to come and see us straight away to have it checked.


Aftercare schedule for your lenses

 

We normally like to see you about 1-4 weeks after picking up your lenses and then again at 3 months, 6 months and at least every 6-12 months thereafter. This is so we can review the health of your eyes and suggest any improvements in your contact lens prescription, lens design or material.  If you do not return for regular aftercare checks we are legally unable to supply you with contact lenses, as they are a health appliance.

Always wear your contact lenses to your contact lens appointments, having had them in for at least 2 hours. Please remember to bring your case and spectacles with you.

Costing

Initial examination – $299

> includes the initial and follow up appointment, trial contact lenses, teaching insertion and removal of contact lenses, starter multipurpose solution cleaning kit,

Cost of RGP contact lenses

$750 for a pair of lenses.

Please note, all prices are a supply for both eyes and are subject to change at any time.

Warranty  

You have 3 months to change the parameters until we find the perfect fitting for your eyes. We offer a 50% CREDIT if lens is unsuccessful.  Sorry, we do not provide warranty for loss of lenses.

What happens if I break my lens?

New lenses are covered by a warranty against breakage for the first 3 months (Please note: you will need to ensure you return the broken lens). After this time we will replace the lens to the same prescription at a 30% discount.

Should I keep a spare set on hand?

It is a good idea to have a spare set of lenses on hand because a new set can take 10-14 days to be made. We can offer a 30% discount on all duplicate lenses purchased. Please speak to your Optometrist for the details.

Refunds

We can give a 50% CREDIT on RGP contact lenses. Please visit us in store, or speak to your optometrist for more details. Please note we do not give refunds on fitting fees. Please see our office policy or speak to your optometrist for further details.

Book an eye test with us

Thinking about transitioning from glasses to contact lenses? Or just want to find out if RGP contact lenses are right for you? Book an appointment with us today!